Mother’s Day Make And Take Instructions

/

Scroll down to find the craft you chose!

———-

Green Foliage Wallpaper Coaster

 
 

This is pre-adhesive’d (is that a word?) wallpaper from the famed Magnolia (yes, Chip & Jo) company.

  1. Choose shape (circle or hexagon)

  2. Pick up a corresponding piece of green foliage wallpaper

  3. Take the paper off the cork sticker and stick it on one side of the coaster, centered

  4. Using the spray bottle, spray water on the ceramic side of the coaster, soak it until it’s dripping

  5. Also spray water on the white side of the wallpaper, soak it until it’s dripping as well

    1. Note: you really can’t use “too much” water here

  6. Place the wallpaper on the coaster, centered.

  7. Press any air bubbles out from the center to the edges

  8. Dab the coaster with a paper towel

  9. Done!

  10. If the spray bottle is low, please fill it up :)

Cow Peel-And-Stick Wallpaper Coasters

 
 

This is peel-and-stick wallpaper from Spoonflower.

  1. Choose shape (circle or hexagon)

  2. Pick up a corresponding piece of cow wallpaper

  3. Take the paper off the cork sticker and stick it on one side of the coaster, centered

  4. Take the paper backing off the wallpaper and place it on the coaster, centered.

  5. Press any air bubbles out from the center to the edges

  6. Done!

Scrabble Coasters

 
 

  1. Get a square piece of cork (ok it’s really a rectangle)

  2. Plan your design. What will your coaster say?

  3. Go get 20 corresponding scrabble pieces. There are more scrabble pieces in the store at Little Wooden Penguin!

    1. Hint: to make “blanks”, just turn the tile over

  4. Peel the backing off the cork sticker and place it in front of you, sticky side up

  5. Carefully place your 20 scrabble tiles. They’ll fit perfectly, so make sure the edges are all lined up.

  6. Done!

Ribbon Purse/Bag Charm

 
 

  1. Pick up a keychain head

  2. Choose 12-15 pieces of ribbon

  3. Put one piece of ribbon off to the side

  4. Bunch all of the other ribbons together at one end and thread it through the loop on the keychain head

  5. Pull it through until it’s even

  6. To keep it all together, use the last piece of ribbon to tie a knot around all the ribbon right under the keychain head

  7. Done!